Quantcast
Tuesday, April 23, 2019

MiMiX inbound

Posted by Mikers On October - 27 - 2014

Are you using Audiobus 2 on a regular basis? bet you wish you could properly mix all iPad music apps the traditional way. Well wish not longer MiMix is the answer.

shot2With MiMiX You can take total control of mixing of Your favourite Audiobus enabled apps’ outputs in the most convenient way. Just insert MiMiX into the Output Slot of Audiobus, even into multiple chains to mix the sound of the connected input or effect apps. You can even insert MiMIX into the input slot to send the mix to an other app, like a DAV to record the mix.

Features:

– Mix up to 8 Audiobus enabled apps including the system input or multiple channels of a multi-channel input hardware
– Set the main mix volume level between -INF and +12dB
– Set the volume level of each input port between -INF and +12dB
– Set the panning or balance of each port (selectable)
– Mute any port
– Set any port to solo
– Monitor any port or the main mix on the built-in oscilloscopes and VU meters
– Control the main mix volume and volume, balance, mute and solo for each port using a MIDI controller or a Core MIDI app
– Set the MIDI CC parameters of each control via MIDI learn
– Set the MIDI channel and button behaviour in the System Settings
– Double-tap on each knob or slider to set its default value
– Check the saturation indicator for each port to check if the pots power reached 0dB
– Check the clip indicator on the main mix to avoid clipping.
– MiMiX uses a 32 bit integer engine so clipping can only occur at the main mix

For more details on MiMix check the official website – http://ttrgames.hu/mimix/

Leave a Reply

    Designed by Midnight Publishing